解决方案

Redundancy System and Controllers

Customers require high power and high availability. Xicom offers many redundancy systems to maximize network performance. Our engineering team is ready to help design and build the system that is right for your application. All systems feature ethernet-based redundancy control via a touchscreen user interface.

Standard products are available for indoor and outdoor amplifiers. Our two amp solutions include: 1:1, 1+1 hybrid, 1+1 switch-around and 1+1 VPC, and variable phase combined configurations. For more than 2 amplifiers we offer 1:2, 1:2 hybrid combined, 4 amp with VPC combining and 4 amp continuous power solutions. Many custom solutions are also available.

冗余系统

室外冗余系统提供电源组合，并为关键流量提供保护。

控制器

Xicom产品是为实际操作而设计的。所有产品都有一个本地控制器和一个基于网络的GUI。我们通过以太网与所有NMS系统连接。

卫星通信冗余系统

The array of redundancy systems available from Comtech Xicom Technology has grown with new customer requirements and the introduction of new redundancy control approaches. Xicom redundancy systems can be configured for both rack-mount and antenna-mount operation.

For amplifier redundancy switching, the redundancy function can be located in the amplifiers or a separate controller. Amplifiers can accommodate simple systems while separate controllers are required for more complex systems. Irrespective of where the redundancy or switching decision is made, the decision is dependent on the status of the amplifiers.

All Xicom systems rely on summary fault signals via hardware for amplifier status, i.e. summary fault relay contacts, as it provides the most robust and quickest way to do the automatic switching. Additional amplifier monitor and control is communicated between amplifiers, and controllers if required, via serial or Ethernet communications.

单线程系统

康泰克提供各种单线系统，包括：

  • 带负载开关的单线程
  • 带极性开关的单线
  • 带有负载和极性开关的单线程

1:1冗余系统

康泰克提供各种单线系统，包括：

  • 基本的1:1系统
  • 1:1系统，带联动输入开关
  • 带独立输入开关的1:1系统
  • 1:1系统，带双极输出和2个HPA负载开关
  • 带负载和极性开关的1:1系统
  • 带有双极输出和负载开关的1:1系统

1+1功率组合系统

Comtech公司提供各种双功放功率组合系统，包括：

  • 1+1混合系统
  • 带负载开关的1+1混合系统
  • 带有Pol开关的1+1混合系统
  • 带有HPA和输出负载开关的1+1混合系统（"Magic-T "系统）。
  • 1+1混合切换式系统
  • 1+1 VPC系统

1:2冗余系统

康泰克提供各种1:2的冗余系统，包括：

  • 标准1:2系统
  • 1:2系统与混合动力
  • 带负载开关的1:2系统
  • 1:2系统，主动待机
  • 1:2系统，有源待机（Ka波段平衡）。
  • 1:2系统，带主动待机和负载开关

1:N系统

康泰克提供各种先进的系统，包括：

  • 基本的1:3系统
  • 基本的1:4系统

连续动力系统

Comtech开发了一系列的室内和室外软故障连续供电系统。这些系统可用于TWTAs和SSPA：

  • 4路连续供电系统
  • 8路连续供电系统
  • 定制系统

用于TWTAs、SSPA和KPA的控制器

Comtech Xicom amplifiers are complemented by a full suite of control system solutions. Controllers are available in 1RU configurations for basic systems in tight places and in 3RU touchscreen user interface for complex amplifier and switching configurations. Custom solutions can be implemented in the controller software.

Touchscreen Controllers
Comtech’s new generation of XTCT rack-mount controllers provide an easy to use, intuitive touch screen interface for monitoring and controlling outdoor amplifiers (ODUs). The new touch screen front panel displays the HPA’s operational status, including power output and temperature, graphical displays of parameter trend analysis, and event logs. Local and remote diagnostics can also be easily performed via an Ethernet interface.

This new display eliminates the need for a separate external controller to control multiple HPAs for common architectures (TWTAs or SSPAs). All operational data is saved within the amplifier’s non-volatile memory, providing a complete history of the HPA in the event that the unit needs service or repair.

The XTCT controller is housed in a 3RU, 19-inch rack unit and can be configured for controlling a single amplifier or multiple amplifiers in a 1:N redundancy system. The use of Ethernet technology means that additional HPAs and switches can be controlled to meet individual customer’s requirements.

Local and remote diagnostics can also be easily performed via an Ethernet interface. This new display eliminates the need for separate external controllers for common architectures because it can show and control waveguide switches and a combiner, providing both cost and space savings.

Features:

  • 紧凑、独立的设计
  • 直观的设置、控制和监测
  • 系统配置和控制
  • HPA性能数据和事件记录
  • 远程诊断

Options:

  • 单个/多个放大器远程操作
  • 1:N冗余
  • 负载切换
  • 相位/频率组合系统
  • 上行链路功率控制

XTC-114E用于EF数据和Xicom放大器/BUC

XTD-114E最多可以控制2个开关，因此它是大多数1:1和1+1系统配置的理想选择。它针对的是没有空间安装RS-485接口的低功率BUC，并且可能缺乏内置的冗余控制。它是小尺寸和低成本安装的理想选择，高度为1RU，深度仅为10英寸。它包括冗余的交流电源，并支持通过以太网连接的Web浏览器界面。

特点：

  • 完整的放大器状态和控制
  • 通过串行以太网接口进行远程/本地控制（取决于型号）。
  • 两个串行接口端口：数字控制器中的RS-232和RS-485
  • 前面板数字显示
  • 紧凑型设计单元

モンクレール配置放大器类型前面板显示尺寸重量(LBS)数据表
XTCT-124D独家任何带以太网的Comtech放大器触摸屏3RU6.7下载数据表
XTC-114D单人，1:1和1+1任何Comtech放大器4行1RU6.7下载数据表
XTC-114E单，1:1，1+1w/负载开关所有Comtech数字放大器/BUC，CEFD放大器/BUC4行1RU6.7下载数据表
XTD-115E单，1:1，1+1w/负载开关任何Comtech放大器4行1RU6.7下载数据表
XTD-116E单一，1:1，1+1w/极性开关任何Comtech放大器4行1RU6.7下载数据表

与市场上领先的卫星放大器技术专家联系

联系我们